Lecture notes for ECE 511/411 CMOS Analog IC Design, Fall 2008

 

December 11 – Final exam

December 9 – lec26_ece5411.pdf and lec26_ece5411_video – wrap up course, review for the final exam

December 4 – lec25_ece5411.pdf and lec25_ece5411_video – Section 24.5, introduction to switched-capacitor circuits

December 2 – lec24_ece5411.pdf and lec24_ece5411_video – folded-cascode op-amps with output buffers, gain-enhancement

November 27 – Thanksgiving break

November 25 – Thanksgiving break

November 20 – lec23_ece5411.pdf and lec23_ece5411_video – operational transconductance amplifiers (OTAs)

November 18 – lec22_ece5411.pdf and lec22_ece5411_video – review and finish-up two-stage op-amps

November 13 – Test#2, closed book and notes

November 11 – Veteran’s Day

November 6 – lec21_ece5411.pdf and lec21_ece5411_video – review for Test#2

November 4 – lec20_ece5411.pdf and lec20_ece5411_video – compensation of two-stage op-amps

October 30 – lec19_ece5411.pdf and lec19_ece5411_video – introduction to the design of CMOS op-amps

October 28 – lec18_ece5411.pdf and lec18_ece5411_video – bandgap references

October 23 – lec17_ece5411.pdf and lec17_ece5411_video – CTAT and PTAT references, resistor-MOSFET references

October 21 – lec16_ece5411.pdf and lec16_ece5411_video – CMRR, matching, slew-rate, other diff-amp

October 16 – lec15_ece5411.pdf and lec15_ece5411_video – start differential amplifiers, DC/AC operation, input CMR

October 14 – lec14_ece5411.pdf and lec14_ece5411_video – canceling the RHP Zero, more frequency response

October 9 – lec13_ece5411.pdf and lec13_ece5411_video – current source loads, more frequency response

October 7 – lec12_ece5411.pdf and lec12_ece5411_video – amplifier frequency response

October 2 – lec11_ece5411.pdf and lec11_ece5411_video – start Ch. 21, amplifiers with gate-drain connected loads, Miller’s theorem

September 30 – Test#1, closed book and notes

September 25 – lec10_ece5411.pdf and lec10_ece5411_video – review for Test#1

September 23 – lec9_ece5411.pdf and lec9_ece5411_video – regulated drain current mirror, biasing circuits

September 18 – lec8_ece5411.pdf and lec8_ece5411_video – BMR for nanometer biasing, the cascode current mirror

September 16 – lec7_ece5411.pdf and lec7_ece5411_video – the beta-multiplier reference (BMR) and its stability

September 11 – lec6_ece5411.pdf and lec6_ece5411_video – introduction to current mirrors, supply independent biasing

September 9 – lec5_ece5411.pdf and lec5_ece5411_video – temperature effects, Tables 9.1 and 9.2

September 4 – lec4_ece5411.pdf and lec4_ece5411_video – body effect and design in nanometer CMOS

September 2 – lec3_ece5411.pdf and lec3_ece5411_video – more fT, gmro, and GFT, general device sizing

August 28 – lec2_ece5411.pdf and lec2_ece5411_video – continue with Ex. 9.5, device fT

August 26 – lec1_ece5411.pdf and lec1_ece5411_video – Course introduction, start Ch. 9 on Analog models

 

Return