Lecture notes for ECE 572/472 Power Electronics, Fall 2011

 

December 15 – final exam, 6:00 to 8:00 PM

December 8 – lec27_ece5472.pdf and lec27_ece5472_video – review for the final exam

December 6 – lec26_ece5472.pdf and lec26_ece5472_video – charge pumps

December 4 – lec25_ece5472.pdf and lec25_ece5472_video – driving power MOSFETs, stacking for higher-voltages

November 29 – lec24_ece5472.pdf and lec24_ece5472_video – finish up SCR and Triac discussion, MOSFET capacitances

November 17 – lec23_ece5472.pdf and lec23_ece5472_video – operation and modeling an SCR (a Thyristor), controlled rectifiers

November 15 – Midterm2

November 10 – lec22_ece5472.pdf and lec22_ece5472_video – review for midterm exam

November 8 – lec21_ece5472.pdf and lec21_ece5472_video – discuss, basic home wiring, grounding, and how to power equipment

November 1 – lec20_ece5472.pdf and lec20_ece5472_video – wrap-up of projects, answer and discuss questions

October 27 – lec19_ece5472.pdf and lec19_ece5472_video – analysis of Inverters, simulation of Inverters

October 25 – lec18_ece5472.pdf and lec18_ece5472_video – introduction to Inverters, the full-bridge converter and the square-wave Inverter

October 20 – lec17_ece5472.pdf and lec17_ece5472_video – discuss selecting device sizes, more simulations

October 18 – lec16_ece5472.pdf and lec16_ece5472_video – compensating the loop

October 13 – lec15_ece5472.pdf and lec15_ece5472_video – Type-2 error amplifier (active-PI)

October 11 – lec14_ece5472.pdf and lec14_ece5472_video – power supply control, stability, switch transfer function

October 6 – lec13_ece5472.pdf and lec13_ece5472_video – transistor-level building blocks

October 4 – lec12_ece5472.pdf and lec12_ece5472_video – resonant converters, zero-voltage switching

September 29 – lec11_ece5472.pdf and lec11_ece5472_video – resonant converters, zero-current switching

September 27 – Midterm1

September 22 – lec10_ece5472.pdf and lec10_ece5472_video – review for the midterm exam

September 20 – lec9_ece5472.pdf and lec9_ece5472_video – theory of discontinuous-current operation, modeling transformers (data sheet) using LTspice, wrap-up Ch. 6

September 15 – lec8_ece5472.pdf and lec8_ece5472_video – single-ended primary inductance converter (SEPIC), interleaved converters, discontinuous-current operation

September 13 – lec7_ece5472.pdf and lec7_ece5472_video – review of topologies and minimum inductor calculations, the Ćuk (pronounced “Chook”) converter

September 6 – lec6_ece5472.pdf and lec6_ece5472_video – operation and analysis of the Buck-Boost converter

September 2 – lec5_ece5472.pdf and lec5_ece5472_video – operation and analysis of the Boost converter

September 1 – lec4_ece5472.pdf and lec4_ece5472_video – more Buck converters analysis and design

August 30 – lec3_ece5472.pdf and lec3_ece5472_video – the Buck DC-DC converter, Sec. 6.3

August 25 – lec2_ece5472.pdf and lec2_ece5472_video – power and energy, capacitors and inductors, RMS values

August 23 – lec1_ece5472.pdf and lec1_ece5472_video – course introduction, linear and switching regulators, diode reverse recovery, introduction to LTspice

 

Return