Homework assignments for EE 320 Engineering Electronics I, Spring 2013

 

Homework guidelines are found here.

 

HW#19 – hw19.pdf, due Wednesday, May 8

HW#18 – hw18.pdf, due Monday, May 6

HW#17 – 5.2, 5.3, 5.14, and 5.15 due Wednesday, May 1

HW#16 – show how to add a common–drain (SF) amplifier in cascade with the amplifiers designed in HW#15 so that the resulting amplifiers can drive a load resistance much smaller than 10k while still maintaining a gain >10, due Wednesday, April 17.

HW#15 – design two MOSFET common–source amplifiers, one using the ZVN3306A (NMOS) and one using the ZVP3306A (PMOS), to provide a gain > 10 @ 1 kHz using a +9 V battery. Assume that the load resistance is >= 10k and the source resistance is <= 10k. Simulate your design to verify it works as expected (you make the SPICE models, that is determine KP, W, L, etc., for these transistors). Also, determine the minimum and maximum output swing for your design, due Wednesday, April 10

HW#14 – hw14.pdf, due Monday, April 8

HW#13 – 4.48, 4.65, 4.73, 4.89, and 4.90 due Wednesday, April 3

HW#12 – 4.22, 4.25, 4.27, 4.30, 4.37, and 4.42 due Monday, April 1

HW#11 – 4.12, 4.14, 4.15, and 4.18, due Wednesday, March 20

HW#10 – 4.1, 4.2, 4.4, 4.9, and 4.11, due Monday, March 18

HW#9 – 3.51, 3.57, 3.58, 3.61, 3.62, 3.68, 3.69, 3.70, 3.81, 3.89, 3.91, and 3.94, due Wednesday, March 13

HW#8 – 3.31, 3.34, 3.37, 3.39, 3.44, 3.46, and 3.50, due Monday, March 11

HW#7 – 3.1, 3.2, 3.6, 3.17, 3.18, 3.21, 3.24, and 3.25, due Friday, March 1

HW#6 – 2.33, 2.35, 2.37, 2.45, 2.49, 2.50, and 2.51, due Monday, February 25

HW#5 – 2.20, 2.23–2.27, due Wednesday, February 13

HW#4 – 2.10, 2.12, 2.15, 2.18, and 2.19, due Monday, February 11

HW#3 – hw3.pdf, due Wednesday, February 6

HW#2 – 1.36, 1.37, 1.40, and 1.41, due Monday, February 4

HW#1 – hw1.pdf, due Wednesday, January 30

 

Return